PROUVON 10 Gigabit Fiber
The widespread use of fiber has made today's network planning much easier, and the performance of the network has been greatly improved and more assured. Fiber-optic communication technology is widely used from the Internet all over the world to major campuses and enterprises. The "information superhighway" is trying to extend directly to each cell through fiber optics, or even directly to the user's home.
Why use 10 Gigabit fiber
Fiber optics is the first choice for 10 Gigabit Ethernet applications due to its small size, large capacity, and bandwidth bandwidth. Although a single-mode fiber can meet this requirement, a laser source is required, and the cost of the corresponding optical transceiver is also very high. Ordinary multimode fiber can only meet the requirements of Gigabit or less, and cannot meet the requirements of high-speed Ethernet. After research, the industry developed a light source called VCSEL, which has better performance than traditional LED light sources. Optimized to improve 50/125 micron fiber, with VCSEL, it can support 10Gb/s of 300m distance cable trunk at 850nm wavelength, and can reach 900m when supporting Gigabit applications. The cost is not much higher than that of ordinary multimode fiber.
PROUVON has 50 years of experience in developing fiber optic communication systems and is a world leader in fiber optic communications, while PROUVON is a member of the 10G Ethernet Standards Alliance. In 1998, PROUVON designed and installed the world's first submarine fiber system using dense wavelength division multiplexing technology - "PROUVON Global Network (PROUVON Network)", achieving 16*10Gbps high-speed transmission with a transmission distance of more than 500km. The system is currently in the world. The largest submarine fiber system that connects to the world's five continents and network communications in more than 70 countries. The PROUVON 10 Gigabit Fiber System is a higher performance multimode fiber system optimized for 10 Gb/s. The system can support 10 Gigabit data rates over a distance of 300 meters. The system is a continuous, end-to-end solution that provides excellent performance matching. The network backbone can be smoothly upgraded from 1G to 10G, without changing the original fiber system, saving you money.
PROUVON fiber
PROUVON fiber is designed for use with VCSELs and is compliant with ISO/IEC11801-2nd OM-3 fiber specifications to meet the needs of 10 Gigabit Ethernet applications. There are many types of PROUVON fiber, including indoor type, indoor/outdoor versatility, insect proof type, etc. The number of cores of the fiber is from 4 cores to 48 cores. It also supports all applications based on older multimode 50/125 micron fiber, including support for LED sources and laser sources. PROUVON fiber supports the low-cost, high-performance serial transmission technology 10GBase-SR, which supports the lowest cost source of light – the 850 nm source, and the electronics that use it to transmit 10 Gigabits over distances of 300 meters or more. In addition, the transmission distance of Gigabit Ethernet using the PROVUON fiber system can be extended to 900 meters, which means that users do not have to use expensive laser devices when the distance between floors is more than 550 meters. At the same time, PROUVON fiber is compatible with existing fiber distribution frames and connection hardware, supporting traditional network technologies TokenRing, FDDI, VG AnyLAN, Ethernet, Fibre Channel, and ATM, which can be used for horizontal systems, vertical systems, and centralized fiber cabling.
The fiber is made of low-smoke, halogen-free skin and meets the standard requirements. It can prevent the spread of flame, prevent the emission of smoke, acid gases and poisonous gases;
Available in a variety of types and models for a variety of architectures and applications;
The minimum installation radius is 90mm; the minimum service radius is 60mm;
The maximum installation tension is 1000N; the maximum working tension is 600N; the anti-extrusion capacity is 2000N;
Operating temperature range is -20 ° C - 70 ° C.
PROUVON fiber optic connectors are optimized for 10 Gigabit applications and support connectors such as SC and LC and small fiber optic connectors MT-RJ. The various connectors are compatible with existing fiber distribution frames, support LightCrimp technology, and fix the fiber by mechanical crimping, eliminating the need for gluing and sanding, and can be easily and quickly installed on site. It takes only three simple steps: stripping the cable sheath, breaking the fiber and crimping it, and you can complete the entire termination process in less than a minute. The fiber optic connector can be used for fiber optic cables with buffer layers of 250 μM and 900 μM and with cables of 2.5 mm or 3 mm. And the connector's characteristic index test fully meets and exceeds the requirements of TIA/EIA-604-3. At the same time, the gray appearance is used to distinguish it from the traditional connector.
